EIA-423 - definitie. Wat is EIA-423
Diclib.com
Woordenboek ChatGPT
Voer een woord of zin in in een taal naar keuze 👆
Taal:

Vertaling en analyse van woorden door kunstmatige intelligentie ChatGPT

Op deze pagina kunt u een gedetailleerde analyse krijgen van een woord of zin, geproduceerd met behulp van de beste kunstmatige intelligentietechnologie tot nu toe:

  • hoe het woord wordt gebruikt
  • gebruiksfrequentie
  • het wordt vaker gebruikt in mondelinge of schriftelijke toespraken
  • opties voor woordvertaling
  • Gebruiksvoorbeelden (meerdere zinnen met vertaling)
  • etymologie

Wat (wie) is EIA-423 - definitie

STANDARD FOR SERIAL COMMUNICATION
RS423; EIA-423; EIA RS423
  • Guidelines for data rate versus line length

EIA-423         
<communications, standard> (Formerly "RS-423") An EIA serial line standard which specifies single ended communication. The mechanical connections for this interface are specified by EIA-449. Although it was originally intented as a successor of EIA-232 it is not widely used. The EIA-232 standard has its limits at 20kbps and 1.5m. EIA-423 can have a cable lenght of 1200m, and achieve a data rate of 100Kbps. When no data is being transmitted, the serial line is at a logical zero (+3 to +15 Volts). A logical one is represented as a signal level of -15 to -3 Volts. In practise, one often finds signals which switch between nominally +4.5 and +0.5 Volts. Such signals are large by modern standards, and because the impedance of the circuits is relatively high, the allowable bit rate is modest. The data is preceded by a start bit which is always a logical one. There may be seven or eight bits of data, possibly followed by an even or odd parity bit and one or two stop bits. A "break" condition is a continuous logical one on the line which is what would be observed if nothing was connected. {Comparing EIA-422, 423, 449 to RS-232-C (http://rad.com/networks/1995/rs232/rs449.htm)}. {Details on RS-232, 422, 423 and 485 (http://rs485.com/rs485spec.html)}. (2002-10-05)
RS-423         
RS-423         
RS-423, also known as TIA/EIA-423, is a technical standard originated by the Electronic Industries Alliance that specifies electrical characteristics of a digital signaling circuit. Although it was originally intended as a successor to RS-232C offering greater cable lengths, it is not widely used.

Wikipedia

RS-423

RS-423, also known as TIA/EIA-423, is a technical standard originated by the Electronic Industries Alliance that specifies electrical characteristics of a digital signaling circuit. Although it was originally intended as a successor to RS-232C offering greater cable lengths, it is not widely used.

RS-423 systems can transmit data on cables as long as 1,200 meters (3,900 ft). It is closely related to RS-422, which used the same signaling systems but on a different wiring arrangement: RS-423 differed primarily in that it had a single return pin instead of one for each data pin.

RS-423 specifies an unbalanced (single-ended) interface, similar to RS-232, with a single, unidirectional sending driver, and allowing for up to 10 receivers. It is normally implemented in integrated circuit technology and can also be employed for the interchange of serial binary signals between DTE & DCE.